Technique characteristics

1. Have 160w, 240w, 320W, 360W, 480w, 600w.Five six bands are available.

2. Each band power can be adjusted separately.Each band can turn ON/ OFF separately.

3. Alarm function for incorrect using way, system fault, high working temperature, high VSWR......

4. Taking use of super-high frequency with high effective power.

5. Effective output power ( channel power) and bigger interfere radius.

6. Only interfere downlink frequency of mobile system

7. Without disturb normally working of Base Stations.

8. Imported elements: Slow start up design of circuit.

9. These elements can maintain the stable operation condition with high integration.



Specification

Output interface Shield band of frequency RF output power Output power/ channel

GSM 900 925-960MHz 80W 27dBm/ 30KHz( min)

DCS & PCS 1805-1990MHz 80W 27dBm/ 30KHz( min)

CDMA 851-894MHz 80W 24dBm/ 30KHz( min)

3G 2110-2170MHz 80W 24dBm/ 30KHz( min)

Humidity: 30% -95%

Running temperature: -10 to + 55 Celsius Degree

Power supply: AC110-220V Output Power: 320w

Jamming Range( Radius) 60-200m( depend on signal intensity of mobile network

Side ( length × wind × high) : 390 × 390 × 240 mm Gross Weight: 30kgs

Working Hours Continuously more than 24hours

4pcs Directional Panel Antenna GW 23kg Size: 134* 32* 21cm



Application area

This cubical cell phone signal jammer is mainly used for large-scale open area outdoor mobile communication signal shielding, large-scale prison playground, lawns, squares, etc., to eliminate security risks and disadvantages caused by mobile phones.